Listing details

Toro Ultra Buggy e2500-TS | Toro HyperCell | 68140

The electric swivel Ultra Buggy e2500-TS gives crews the flawless precision needed to transform jobsites. Operators can unload sand, gravel, concrete and other heavy materials along a 180-degree radius for ultimate precision from any angle. And it’s all powered by Toro’s patented HyperCell® battery technology that delivers up to eight hours of quiet runtime without sacrificing power. Crews will still enjoy the same 2,500-lb carrying capacity of gas models to reduce physical strain and accelerate efficiency on indoor or outdoor jobs. HyperCell Power System® delivers up to 8 hours of continuous runtime. Up to 2,500 lbs carrying capacity Outstanding 180-degree dump radius makes it easy for users to dump material anywhere along the 180-degree radius. Easily fits through standard doors and gates Specifications Battery Capacity 13 kWh Battery Charging Requirements 100-240 Volt, on-board Battery Charging Time Up to 6 hours for full charge Battery Charging Type 100-240 Volt, on-board Battery Chemistry Toro HyperCell Lithium Ion Discharge Height 17.8 in. / 45.2 cm Distributed Floor Pressure - Loaded 1.55 psi Distributed Floor Pressure - Unloaded 1.05 psi Dump Position Swivel Fuel Type Electric Height 52.1 in. / 132.3 cm Length - Platform Down 100.7 in. / 255.7 cm Length - Platform Up 87.9 in. / 223.2 cm Max Load Capacity - Full Dump Height 1,250 lbs / 567 kg Max Load Capacity - Standard Dump Height 2,500 lbs / 1,134 kg Maximum Load Capacity 2,500 lbs / 1,134 kg Run Time Up to 8 hours Speed - Forward Up to 5.0 mph / 8.0 kph Speed - Reverse Up to 3.0 mph / 4.8 kph Tracks Rugged armid corde Tub Material Polyethylene Tub Volume 14 ft³ (0.4 m³) Weight 2,080 lbs / 943.4 kg Width 31.5 in. / 80.65 cm   Recommended Maintenance Schedule Maintenance Service Interval Maintenance Procedure After the first 50 hours Change the drive-motor gear oil. Before each use or daily Check the swivel hydraulic fluid level. Check the high-lift hydraulic fluid level. Remove debris. Check for loose fasteners. Every 40 hours Check the hydraulic lines. Every 50 hours Grease and oil the machine. Every 500 hours Change the drive-motor gear oil. Change the swivel hydraulic fluid and filter. Change the high-lift hydraulic fluid and filter. Change the swivel hydraulic filter. Change the high-lift hydraulic filter. Every 1,500 hours Replace all moving hydraulic hoses. Yearly or before storage Touch up chipped paint.   Change the swivel hydraulic fluid. Change the high-lift hydraulic fluid. Change the swivel hydraulic filter. Change the high-lift hydraulic filter. · Ultra Buggy · Toro-Dingo